 |
MBD-X9DRT-HIBQF -B |
|
|
 |
Form
Factor |
|
Dimensions |
- 6.8" x 16.64" (17.2cm x 42.3cm)
|
|
 |
CPU |
- Intel® Xeon® processor E5-2600
- Dual Socket R (LGA 2011)
|
Cache |
|
System
Bus |
|
|
 |
Memory
Capacity |
- 8x 240-pin DDR3 DIMM sockets
- Supports up to 256 GB DDR3 ECC Registered
memory (RDIMM)
- Supports up to 64 GB DDR3 ECC Un-Buffered
memory (UDIMM)
|
Memory
Type |
- 1600/1333/1066/800MHz ECC DDR3 SDRAM
72-bit, 240-pin gold-plated DIMMs
|
DIMM
Sizes |
- 32GB, 16GB, 8GB, 4GB, 2GB, 1GB
|
Memory
Voltage |
|
Error
Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC
memory)
|
|
 |
Chipset |
|
Infiniband |
- Mellanox ConnectX-3 QDR Infiniband 40Gbps
Controller
|
SATA |
- SATA 2.0 & 3.0 with RAID 0, 1, 5, 10
|
IPMI |
- Support for Intelligent Platform Management
Interface v.2.0
- IPMI 2.0 with virtual media over LAN and
KVM-over-LAN support
- Nuvoton WPCM450 BMC
|
Network Controllers |
- Intel® i350 Dual Port Gigabit Ethernet
- Virtual Machine Device Queues reduce I/O
overhead
- Supports 10BASE-T, 100BASE-TX, and
1000BASE-T, RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
|
Video |
- G200 (Nuvoton WPCM450 BMC with graphic
controller)
|
Super
I/O |
|
|
 |
SATA |
- 5x SATA 2.0 ports (3Gbps)
- 2x SATA 3.0 ports (6Gbps)
|
LAN |
- 2x RJ45 Gigabit Ethernet LAN ports
- 1x RJ45 Dedicated IPMI LAN port
|
USB |
- 3x USB 2.0 ports (2 rear + 1 Type-A)
|
Video |
|
Serial
Port / Header |
|
Infiniband |
- 1 external QSFP Infiniband connector
|
DOM |
- 1 DOM (Disk on Module) power connector
|
|
 |
 |
 |
2U
Chassis |
|
3U
Chassis |
|
Important Chassis Notes |
- To support the new generation Intel® Xeon®
processor-based motherboards, Revision M
chassis is recommended. Please talk to your sales
representative for details.
|
|
 |
PCI-E |
- 1 x24 left hand riser + 1 x8 slot for SMCI
AOC
|
|
 |
BIOS
Type |
- 128Mb SPI Flash EEPROM with AMI BIOS
|
BIOS
Features |
- Plug and Play (PnP)
- APM 1.2
- PCI 2.3
- ACPI 1.0 / 2.0 / 3.0 / 4.0
- USB Keyboard support
- SMBIOS 2.7.1
- UEFI
|
|
 |
Software |
|
Power
Configurations |
- ACPI / APM Power Management
- Power-on mode for AC power recovery
|
|
 |
CPU |
- Monitors for CPU Cores, +1.1V, +1.5V,
+3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory
Voltages.
- 5+1 Phase-switching voltage regulator
|
FAN |
- Status monitor for speed control
- Pulse Width Modulated (PWM) fan connectors
|
Temperature |
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Monitor 2 (TM2) support
- PECI
|
LED |
- CPU / System Overheat LED
- Suspend Static indicator LED
- UID/Remote UID
|
Other
Features |
|
|