 |
|
MBD-X9SCM-F -B |
|
| |
|
|
| Form
Factor |
uATX
|
|
Dimensions |
9.6" x 9.6", (24.4cm x 24.4 cm)
|
| |
|
|
| CPU |
- Intel® Xeon® processor E3-1200 & v2
series, Intel® 2nd Gen and 3rd Gen Core i3, Intel® Pentium®
and Celeron processors *** *
- Socket H2 (LGA 1155)
|
| |
|
|
| Memory
Capacity |
- 4x 240-pin DDR3 DIMM sockets
- Supports up to 32 GB DDR3 ECC Un-Buffered
memory (UDIMM)
|
| Memory
Type |
- 1333/1600MHz*** ECC DDR3 SDRAM 72-bit,
240-pin gold-plated DIMMs
|
| DIMM
Sizes |
|
| Memory
Voltage |
|
| Error
Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC
memory)
|
| |
|
|
|
Chipset |
|
| SATA |
- 4x SATA2 (3Gb/s) w/ RAID 0, 1, 5, 10
- 2x SATA3 (6Gb/s) w/ RAID 0, 1
|
| IPMI |
- Support for Intelligent Platform Management
Interface v.2.0
- IPMI 2.0 with virtual media over LAN and
KVM-over-LAN support
- Nuvoton WPCM450 BMC
|
|
Network Controllers |
- Intel® 82579LM and 82574L, 2x Gigabit LAN
ports
- Virtual Machine Device Queues High
efficient I/O overhead
- Supports 10BASE-T, 100BASE-TX, and
1000BASE-T, RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
|
| VGA |
- BMC integrated Matrox G200
|
| Super
I/O |
|
| |
|
|
| Serial
ATA |
- 6 SATA ports
- 6 SATA hard drives supported
|
| LAN |
- 2x RJ45 LAN ports
- 1x RJ45 Dedicated IPMI LAN port
|
| USB |
- 9x USB 2.0 ports total
(2x rear + 6x via header + 1x type A)
|
| VGA |
|
| Serial
Port / Header |
- 2x Fast UART 16550 serial port
(one header and one rear port)
|
| DOM |
- 1x DOM (Disk on Module) power connector
|
| TPM |
|
|
 |
|
|
|
|
| 1U
Chassis |
|
|
Important Chassis Notes |
- To support the new generation Intel® Xeon®
processor-based motherboards, a
Revision K chassis is
recommended for most models. Please talk to your sales
representative or follow the link for details.
|
| |
|
|
|
PCI-Express |
- 2 (x8) PCI-E 3.0 in x8 slots***
- 2 (x4) PCI-E 2.0 in x8 slots
|
| |
|
|
| BIOS
Type |
- 64Mb SPI Flash EEPROM with AMI BIOS
|
| BIOS
Features |
- DMI (SMBIOS) 2.7
- ACPI 4.0
- PCI 2.3
- USB Keyboard support
|
| |
|
|
|
Software |
- IPMI (Intelligent Platform Management
Interface) v1.5 / 2.0 with KVM support
-
SuperDoctor® III
- Watch Dog
- NMI
|
| Power
Configurations |
- ACPI / ACPM Power Management
- Main Switch Override Mechanism
- Power-on mode for AC power recovery
- Internal/External modem ring-on
|
| |
|
|
|
Voltage |
- Monitors for CPU Cores, +1.8V, +3.3V, +5V,
±12V, +3.3V Standby, +5V Standby, VBAT, HT, Memory, Chipset
Voltages.
- 5-Phase-switching voltage regulator with
auto-sense from 0.8375V-1.60V
|
| FAN |
- Total of 5 fan headers supporting up to 5
fans
- Five 4-pin fan headers
- 5x fans with tachometer status monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Support 3-pin fans (w/o speed control)
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
|
|
Temperature |
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- FC temperature sensing logic
- Thermal Monitor 2 (TM2) support
- PECI
|
| LED |
- CPU / System Overheat LED
- +5V Standby alert LED
|
| Other
Features |
- Chassis intrusion detection
- Chassis intrusion header
|
|