Supermicro MBD-X10SLL+-F  (MBD-X10SLL+-F)

Product Details
New Page 1
Product SKUs
MBD-X10SLL+-F
  • X10SLL+-F (Bulk Pack)
 
Physical Stats
Form Factor
  • uATX
Dimensions
  • 9.6" x 9.6", (24.4cm x 24.4 cm)
 
Processor/Cache
CPU
  • Intel® Xeon® processor E3-1200 v3 and 4th Gen Core i3, Pentium, Celeron processors
  • Single Socket H3 (LGA 1150)
 
System Memory
Memory Capacity
  • 4x 240-pin DDR3 DIMM sockets
  • Supports up to 32 GB DDR3 ECC Un-Buffered memory (UDIMM)
Memory Type
  • 1600MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
  • 8GB, 4GB, 2GB, 1GB
Memory Voltage
  • 1.5V, 1.35V
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
 
On-Board Devices
Chipset
  • Intel® C222 Express PCH
SATA
  • SATA3 (6Gbps) w/ RAID 0, 1
  • SATA2 (3Gbps) w/ RAID 0, 1, 5, 10
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • Aspeed AST2400 with 10/100/1000M bps MAC
Network Controllers
  • Intel® i210AT Ethernet Controller
  • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
  • 1x Realtek RTL8211E PHY (dedicated IPMI)
VGA
  • BMC integrated Aspeed AST2400
 
Input / Output
Serial ATA
  • 2x SATA3 (6Gbps) ports
  • 4x SATA2 (3Gbps) ports
LAN
  • 2x Gigabit Ethernet LAN ports
  • 1x RJ45 Dedicated IPMI LAN port
USB
  • 2x USB 3.0 ports (1 Type-A, 1 via header)
  • 6x USB 2.0 ports (4 rear, 2 via header)
VGA
  • 1x VGA D-Sub Connector
Serial Port / Header
  • 2x COM ports (1 rear, 1 header)
DOM
  • SATA DOM (Disk on Module) power connector support
TPM
  • 1x TPM 1.2 20-pin Header
Chassis (Optimized for X10SLL+-F )
1U Chassis
Mid-Tower
Important Chassis Notes
  • To support the new generation Intel® Xeon® processor-based motherboards, Revision M chassis is recommended. Please talk to your sales representative for details.
 

 
Expansion Slots
PCI-Express
  • 1x PCI-E 3.0 x8 (in x16) slot
  • 1x PCI-E 3.0 x8 slot
  • 1x PCI-E 2.0 x4 (in x8) slot
 
System BIOS
BIOS Type
  • 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features
  • DMI (SMBIOS) 2.7
  • ACPI 5.0
  • USB Keyboard support
 
Management
Software
  • IPMI (Intelligent Platform Management Interface) v2.0 with KVM support
  • SuperDoctor® III
  • Watch Dog
  • NMI
Power Configurations
  • ACPI / ACPM Power Management
  • Main Switch Override Mechanism
  • Power-on mode for AC power recovery
  • Internal/External modem ring-on
 
PC Health Monitoring
Voltage
  • Monitors for CPU Cores, +12V, +3.3V, +5V, +5V Standby, VBAT, HT, Memory, Chipset Voltages.
  • 5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
FAN
  • Total of five 4-pin fan headers supporting up to 5 fans
  • 5x fans with tachometer status monitoring
  • Status monitor for speed control
  • Status monitor for on/off control
  • Support 3-pin fans (w/o speed control)
  • Low noise fan speed control
  • Pulse Width Modulated (PWM) fan connectors
Temperature
  • Monitoring for CPU and chassis environment
  • CPU thermal trip support
  • FC temperature sensing logic
  • Thermal Monitor 2 (TM2) support
  • PECI
LED
  • CPU / System Overheat LED
  • +5V Standby alert LED
Other Features
  • Chassis intrusion detection
  • Chassis intrusion header

Note : For optimized or compatible chassis, additional parts may be required, please check with Supermicro sales rep.

Select your Style/Color:
Select your Quantity & Size
Qty:
The3DShop
© Copyright 2009. All rights Reserved.

powered by JEMI Systems, LLC