 |
MBD-X10SLL-F |
|
|
 |
Form
Factor |
|
Dimensions |
- 9.6" x 9.6", (24.4cm x 24.4 cm)
|
|
 |
CPU |
- Intel® Xeon® processor E3-1200 v3
and 4th Gen Core i3, Pentium, Celeron processors
- Single Socket H3 (LGA 1150)
|
|
 |
Memory
Capacity |
- 4x 240-pin DDR3 DIMM sockets
- Supports up to 32 GB DDR3 ECC Un-Buffered
memory (UDIMM)
|
Memory
Type |
- 1600MHz ECC DDR3 SDRAM 72-bit, 240-pin
gold-plated DIMMs
|
DIMM
Sizes |
|
Memory
Voltage |
|
Error
Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC
memory)
|
|
 |
Chipset |
|
SATA |
- SATA3 (6Gbps) w/ RAID 0, 1
- SATA2 (3Gbps) w/ RAID 0, 1, 5, 10
|
IPMI |
- Support for Intelligent Platform Management
Interface v.2.0
- IPMI 2.0 with virtual media over LAN and
KVM-over-LAN support
- Aspeed AST2400 with 10/100/1000M bps MAC
|
Network Controllers |
- Intel® i217LM + Intel® i210AT Controllers
- Supports 10BASE-T, 100BASE-TX, and
1000BASE-T, RJ45 output
- 1x Realtek RTL8211E PHY (dedicated IPMI)
|
VGA |
- BMC integrated Aspeed AST2400
|
|
 |
Serial
ATA |
- 2x SATA3 (6Gbps) ports
- 4x SATA2 (3Gbps) ports
|
LAN |
- 2x Gigabit Ethernet LAN ports
- 1x RJ45 Dedicated IPMI LAN port
|
USB |
- 2x USB 3.0 ports (1 Type-A, 1 via header)
- 6x USB 2.0 ports (4 rear, 2 via header)
|
VGA |
|
Serial
Port / Header |
- 2x COM ports (1 rear, 1 header)
|
DOM |
- SATA DOM (Disk on Module) power connector
support
|
TPM |
|
|
 |
 |
 |
1U
Chassis |
|
Mid-Tower |
|
Important Chassis Notes |
- To support the new generation Intel® Xeon®
processor-based motherboards, Revision M
chassis is recommended. Please talk to your sales
representative for details.
|
|
 |
 |
Model(s) |
|
 |
PCI-Express |
- 1x PCI-E 3.0 x8 (in x16) slot
- 1x PCI-E 3.0 x8 slot
- 1x PCI-E 2.0 x4 (in x8) slot
|
|
 |
BIOS
Type |
- 128Mb SPI Flash EEPROM with AMI BIOS
|
BIOS
Features |
- DMI (SMBIOS) 2.7
- ACPI 5.0
- USB Keyboard support
|
|
 |
Software |
- IPMI (Intelligent Platform Management
Interface) v2.0 with KVM support
-
SuperDoctor® III
- Watch Dog
- NMI
|
Power
Configurations |
- ACPI / ACPM Power Management
- Main Switch Override Mechanism
- Power-on mode for AC power recovery
- Internal/External modem ring-on
|
|
 |
Voltage |
- Monitors for CPU Cores,
+12V, +3.3V, +5V, +5V
Standby, VBAT, HT, Memory, Chipset Voltages.
- 5-Phase-switching voltage regulator with
auto-sense from 0.8375V-1.60V
|
FAN |
- Total of five 4-pin fan headers supporting
up to 5 fans
- 5x fans with tachometer status monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Support 3-pin fans (w/o speed control)
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
|
Temperature |
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- FC temperature sensing logic
- Thermal Monitor 2 (TM2) support
- PECI
|
LED |
- CPU / System Overheat LED
- +5V Standby alert LED
|
Other
Features |
- Chassis intrusion detection
- Chassis intrusion header
|
|